FURUTECH SA-22 XLR HANDMADE 4 MT

Pair of Furutech SA-22 signal cables terminated by HiFi Di Prinzio with Neutrik NC-FXX and NC-MXX XLR connectors. Length: 4 m.

Furutech SA-22 technical specifications:

• Conductor: μ-OFC, consisting of 80 × 0.18 mm wires
• Insulation: special polyethylene, red and white
• Construction: 2 conductors twisted together with cotton filler
• Shielding: wrapped AL/PET tape; 0.12 mm μ-OFC wire braid
• Barrier layer: wrapped paper tape
• Outer jacket: ultra-flexible lead-free PVC, dark brown
• Type: Hyper Balanced
• Maximum conductor resistance: 0.00924 Ω/m
• Outer diameter: 9.0 mm, equivalent to 14 AWG

Neutrik NC-FXX technical specifications:

• Connection type: XLR; female
• Capacitance between contacts: ≤ 4 pF; contact resistance: ≤ 3 mΩ
• Dielectric strength: 1.5 kV DC; insulation resistance: > 10 GΩ (initial)
• Rated current per contact: 16 A; rated voltage: < 50 V
• Compatible cable diameter: 3.5–8.0 mm
• Insertion force: ≤ 20 N; withdrawal force: ≤ 20 N
• Lifetime: > 1000 mating cycles
• Maximum conductor size: 2.5 mm²; equivalent: 14 AWG
• Locking device: latch lock
• Boot: polyurethane
• Contact plating: 2 μm silver
• Contacts: bronze CuSn8
• Insert: polyamide PA66
• Locking element: zinc diecast ZnAl4Cu1; Ck 67 spring
• Locking element plating: nickel
• Shell: zinc diecast ZnAl4Cu1; nickel plating
• Strain relief: polyacetal POM

Neutrik NC-MXX technical specifications:

• Connection type: XLR; male
• Capacitance between contacts: ≤ 4 pF; contact resistance: ≤ 3 mΩ
• Dielectric strength: 1.5 kV DC; insulation resistance: > 10 GΩ (initial)
• Rated current per contact: 16 A; rated voltage: < 50 V
• Compatible cable diameter: 3.5–8.0 mm
• Insertion force: ≤ 20 N; withdrawal force: ≤ 20 N
• Lifetime: > 1000 mating cycles
• Maximum conductor size: 2.5 mm²; equivalent: 14 AWG
• Wiring: solder contacts
• Locking device: latch lock
• Boot: polyurethane
• Contact plating: 2 μm silver
• Contacts: brass CuZn39Pb3
• Insert: polyamide PA66
• Locking element: zinc diecast ZnAl4Cu1
• Shell: zinc diecast ZnAl4Cu1; nickel plating
• Strain relief: polyacetal POM